Armature Coil And Stack DMD PMP Wedge Fillers Placement Motor Insulation Machine WIND-IW-2
(1) Application:
This slot top cell forming and inserting machine WIND-IW-2 automatical form and insert wedge to form
electrical insulator for coils and stack.
(2) Parameter:
Armature O. D: 20-55mm
Length of lamination: Max 60mm
Shaft length: 32~250mm
Shaft O. D: 6~20mm
Slot number: 8-24 slots
Commutator O. D: 16~50mm
Length of wedge: 15-60mm
Speed regulation range: 0~60Hz
Wedge shape: Flat, U or R shape
Thickness of wedge: 0.2 mm ~ 2.0 mm
Efficiency: 0.5sec - 0.8sec/per slot, loading-Clamp Feeding-unloading (total 8~10sec/cycle for
12 slots armature)
Air source: Air pressure: 4~6kg/cm2
Machine power: 1.0KW
Tooling/fixture: Fast changing integrity forming wheel structure
Voltage: AC220V± 10%, 50/60Hz
Weight: About 400Kg
Dimension: (L)910 x (W)880 x (H)1300mm
(3) Main components:
PLC: MITSUBISHI or Omron programmable controller
Relay: OMRON
Proximity switch: OMRON
MITSUBISHI or Panasonic frequency converter
Touch screen: WENVIEW PLD(7")
Air switch: MITSUBISHI
Power source: Mingwei
Switch: SCHNEIDER
Brake: MIKIPULLEY (Japan brand)
Ball bearing: UBC (USA brand)
Linear guide: ABBA (Taiwan brand) or CPC or Shangying
Cylinder: SMC
Air source treatment elements or electromagnetic valve: SMC
Place insert the insulation wedge to armature, insulate the armature winding and stacks, also fixten the
armature windings.After winding, use thick wedge normally 0.5mm while insulaiton polyester is usually
0.25mm to insert to armature, tight the armature and strength the winding and reduce motor noise.
Please click below photo to view video
Product Tags:
|
|
Wedge Fillers Placement Slot Insulation Machine Armature Coil And Stack DMD PMP Images
|
